QY16D Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Engine Model D6114ZLQ5B
Outline dimension Overall length mm 11990
Overall width mm <=2500
Overall height mm 3350
Wheel base Axle 1, Axle 2 mm 4025
Axle 2, Axle 3 mm 1350
Mass Total mass in travel state kg 24000
Axle load Axle 1 kg 6400
Axle 2 kg 17600
Travel performance Travel speed Max. travel speed km/h >=70
Min. stable travel speed km/h 3-4
Turning diameter Min. turning diameter m <=20
Min. turning diameter at boom tip m <=23
Min. ground clearance mm 270
Approach angle () 21
Departure angle () 10
Braking distance (at 30km/h with full load) m 9.5
Max. grade-ability % 24
Fuel consumption for 100km L 35
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 16
Min. rated working radius m 3
Turning radius at turntable tail m <=3.12
Max. load moment Base boom kN.m 686
Fully extended boom kN.m 388
Fully extended boom + Jib kN.m 254
Outrigger span Longitudinal m 4.6
Lateral m 5.4
Lifting height Base boom m >=9.9
Fully extended boom m >=30.7
Fully extended boom + Jib m >=38.5
Working speed Boom raising time s <=60
Boom full extension time s <=95
Max. swing speed r/min >=2.5
Hoist speed (single line) Main winch Full load m/min >=54
No load m/min >=100
Aux. winch Full load m/min >=54
No load m/min >=100
Noise limit Crane exterior noise dB (A) <=118
At seated position dB (A) <=90
QY25K5 Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Outline dimension Overall length mm 12000
Overall width mm 2500
overall height mm 3380
Mass Total mass in travel state kg 31000
Axle load Front Axle kg 6440
Rear Axle kg 24600
Travel performance Travel speed Max. travel speed km/h 75
Turning diameter Min. turning diameter m 22
Min. ground clearance mm 260
Approach angle () 16
Departure angle () 13
Braking distance (at speed of 30km/h) m 10
Max. grade-ability % 30
Fuel consumption for 100km L 37
Power Engine rated output kW/(r/min.) 206/2200
Engine rated torque N.m/(r/min.) 1112/1400
Engine rated speed rpm. 2200
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 25
Min. rated working radius m 3
Turning radius at turntable tail m 3.065
Max. load moment Base boom kN.m 961
Fully extended boom kN.m 450
Fully-extend boom+Jib kN.m 436
Outrigger span Longitudinal m 4.8
Lateral m 6.0
Lifting height Base boom m 10.2
Fully extended boom m 38.6
Fully extended boom + Jib m 47.6
Working speed ãÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂBoom elevating time Boom raising S 75
Boom telescoping time Boom full extension S 150
Max. swing speed r/min 2.5
Outrigger telescoping time Outrigger beam extending/retracting synchronously S 35/30
Outrigger jack extending/retracting synchronously S 40/35
Hoist speed (single line) Main winch Full load m/min 75
No load m/min 125
Auxiliary winch Full load m/min 75
No load m/min 125
QY40K Truck Crane
Technical Data when Traveling
Classificatory Item Parameter
XZJ5401JQZ40K XZJ5403JQZ40K
Outline dimension Overall length mm 13050
Overall width mm <=2750 <=2800
Overall height mm 3430
Wheel base Axle 1, Axle 2 mm 1520
Axle 2, Axle 3 mm 3815
Axle 3, Axle 4 mm 1350
Track Front mm 2240 2240
Rear mm 2055 2075
Mass Total mass in travel state kg 39800 40400
Axle load Axle 1 kg 13900 14500
Axle 2 kg 25900 25900
Engine Model WD615.46 WD615.334
Rated Power kw/ (r/min) 266/2200 247/2200
Rated Torque N.m/ (r/min) 1460/1400 1350/1400
Rated Rotation Speed r/min 2200 2200
Travel performance Travel speed Max. travel speed km/h >=75
Min. stable travel speed km/h 4.3
Turning diameter Min. turning diameter mm <=24000
Min. turning diameter at boom tip mm <=26800
Min. ground clearance mm >=285
Approach angle >=16
Departure angle >=11
Braking distance (at 30km/h with full load) m <=10
Max. grade-ability >=46%
Fuel consumption for 100km L <=46
Main Technical Data for Lifting Operation Classificatory Item Parameter
Lifting performance Max. total rated lifting capacity t 40
Min. rated working radius m 3
Turning radius at turntable tail m <=3.482
Max. load moment Base boom kN·m 1400
Fully extended boom kN·m 720
Fully extended boom + Jib kN·m 528
Outrigger span Longitudinal m 5.65
Lateral m 6.6
Lifting height Base boom m >=10.9
Fully extended boom m >=40.4
Fully extended boom + Jib m >=55.1
Boom Length Base boom m 10.7
Fully extended boom m 40.1
Fully extended boom + Jib m 40.1+15
Established angle of jib 0, 15, 30
Working speed Boom raising time s <=88
Boom full extension time s <=180
Max. swing speed r/min <=2.0
Outrigger extension time Horizontal outrigger Synchronous s <=30
Synchronous s <=20
Vertical outrigger Synchronous s <=35
Synchronous s <=110
Hoist speed Main winch m/min >=110
Aux. winch m/min >=110
Noise limit Crane exterior noise dB(A) <=118
At seated position dB(A) <=90
QY50K Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Outline dimension Overall length mm 13100
Overall width mm <=2750
Overall height mm 3350
Wheel base Axle 1, Axle 2 mm 1520
Axle 2, Axle 3 mm 3815
Axle 3, Axle 4 mm 1350
Mass Total mass in travel state kg 38580
Axle load Front axle kg 12950
Rear axle kg 25630
Travel performance Travel speed Max. travel speed km/h 66
Min. stable travel speed km/h 2.7
Turning diameter Min. turning diameter m 24
Min. turning diameter at boom tip m 26.8
Min. ground clearance mm 285
Approach angle () 16
Departure angle () 16
Braking distance (at 30km/h with full load) m 10
Max. grade-ability % 27
Fuel consumption for 100km L 36
Power Model WD615.67A
Engine rated output kW/(r/min.) 206/2200
Engine rated torque N.m/(r/min.) 1100/1400
Engine rated speed rpm. 2200
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 50
Min. rated working radius m 3
Turning radius at turntable tail m <=3.485
Max. load moment Base boom kN.m 1764
Fully extended boom kN.m 823
Fully extended boom + Jib kN.m 492.8
Outrigger span Longitudinal m 5.65
Lateral m 6.6
Lifting height Base boom m 10.75
Fully extended boom m 40
Fully extended boom + Jib m 55.8
Working speed Boom raising time s 88
Boom full extension time s 180
Max. swing speed r/min 2.0
Hoist speed Main winch Full load m/min >=85
No load m/min >=110
Aux. winch Full load m/min >=80
No load m/min >=110
Noise limit Crane exterior noise dB (A) <=118
At seated position dB (A) <=90
QY60K Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Outline dimension Overall length mm 13500
Overall width mm 2800
Overall height mm 3510
Wheel base Axle 1, Axle 2 mm 1470
Axle 2, Axle 3 mm 4105
Axle 3, Axle 4 mm 1350
Track Front mm 2304
Rear mm 2075
Mass Total mass in travel state Kg 41000
Axle load Axle1, Axle 2 Kg 15000
Axle 3, Axle 4 Kg 26000
Engine Engine rated output Kw/(r/min) 266/2200
Engine rated torque N.m/(r/min) 1250/1500
Engine rated speed r/min 2200
Travel performance Travel speed Max. travel speed Km/h 75
Min. stable travel speed Km/h 3
Turning diameter Min. turning diameter m 24
Min. turning diameter at boom tip m 29.0
Min. ground clearance mm 290
Approach angle 17.5
Departure angle 12
Braking distance (at 30km/h with full load) m <=10
Max. grade-ability % 40
Fuel consumption for 100km l 45
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 60
Min. rated working radius m 3
Turning radius at turntable tail mm 3550
Max. load moment Base boom KN.m 2060
Fully extended boom KN.m 824
Outrigger span Longitudinal m 5.81
Lateral m 6.7
Lifting height Base boom m 11.2
Fully extended boom m 42
Fully extended boom + Jib m 58
Boom Length Base boom m 11.5
Fully extended boom m 42
Fully extended boom + Jib m 57
Jib offset angle 0, 15, 30
Working speed Boom elevating time Raise S 60
Decline S 80
Boom full telescoping time Extend S 150
Retract S 100
Max. swing speed r/min 2.0
Outrigger extension time Horizontal outrigger Synchronous extension S 30
Synchronous retraction S 20
Vertical outrigger Synchronous extension S 35
Synchronous retraction S 30
Hoist speed (Single line) Main winch Full load m/min 75
Null load m/min 130
Aux. winch Full load m/min 98
Null load m/min 108
QY100K Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Outline dimension Overall length mm 15230
Overall width mm 3000
Overall height mm 3860
Mass Total mass in travel state kg 65000
Travel performance Travel speed Max. travel speed km/h 75
Min. stable travel speed km/h 0.5
Turning diameter Min. turning diameter m 24
Min. turning diameter at boom tip m 26.6
Power ratio kW/t 7.3
Min. ground clearance mm 310
Approach angle () 23
Departure angle () 15
Braking distance (at 30km/h) m <=10
Max. grade-ability % 40
Power Engine rated output kW/(r/min.) 324/1800
Engine rated torque N.m/(r/min.) 2100/1200
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 100
Min. rated working radius m 3
Max. load moment Base boom kN.m 3238
Fully extended boom kN.m 1670
Fully extended boom + Jib kN.m 1127
Outrigger span Longitudinal m 7.56
Lateral m 7.6
Boom length Base boom m 12.8
Fully extended boom m 48
Fully extended boom + Jib m 48 + 18.1
Jib offset angle 0, 15, 30
Working speed Boom elevating time Boom raising s 60
Boom telescoping time Full extending / Full retracting s 140
Max. swing speed r/min 2
Hoist speed (single line at 4th layer) Main winch m/min 110
Aux. winch m/min 85
QY130K Truck Crane
Technical Data when Traveling
Classificatory Item Unit Parameter
Outline dimension Overall length mm 14950
Overall width mm 3000
Overall height mm 3950
Axle base Axle 1, Axle 2 mm 1420
Axle 2, Axle 3 mm 2420
Axle 3, Axle 4 mm 1875
Axle 4, Axle 5 mm 1350
Axle 5, Axle 6 mm 1400
Wheel base mm 2610/2307
Mass Total mass in travel state kg 62000
Axle load Axle 1, Axle 2 kg 8800/8800
Axle 3, Axle 4 kg 9200/12700
Axle 5, Axle 6 kg 12700/9800
Power Crane super structure engine Rated power kw/(r/min) 162/2100
Rated torque N.m/(r/min) 854/1400
Rated speed r/min 2100
Crane carrier engine Rated power kw/(r/min) 390/1800
Rated torque N.m/(r/min) 2400/1080
Rated speed r/min 2000
Travel performance Travel speed Max. travel speed km/h 70
Min. stable travel speed km/h 2.1
Min. turning diameter m 24
Min. ground clearance mm 275
Approach angle () 23
Departure angle () 14
Braking distance (at 30km/h) m <= 10
Max. grade-ability % 40
Fuel consumption for 100km L 80
Main Technical Data for Lifting Operation Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t 130
Min. rated working radius m 3
wing radius at counterweight tail mm 4600
Max. load moment Base boom kN.m 5003
Fully extended boom kN.m 2752
Outrigger span Longitudinal m 7.56
Lateral m 7.6(5.2)
Boom height Base boom m 13
Fully extended boom m 58
Fully extended boom + Jib(28m) m 86.5
Boom length Base boom m 13
Fully extended boom m 58
Fully extended boom + Jib (20m) m 81
Jib offset angle 0, 15, 30
Working speed Boom elevating time Boom raising s 60
Boom telescoping time Full extending s 420
Full retracting s 400
Max. swing speed r/min 1.8
Outrigger telescoping time Outrigger beam Synchronous extension s 50
Synchronous retraction s 40
Outrigger jack Synchronous extension s 50
Synchronous retraction s 45
Hoist speed (single line at 4th layer) Main winch (Null load) m/min 115
Aux. winch (Null load) m/min 115
Noise Crane exterior noise dB (A) <=118
At seated position dB (A) <=90
QY20H431 Truck Crane
Specification of QY20H431 Truck Crane
Item Value Remarks
Working performance specification Max. rated total lifting capacity kg 20000
Max. load moment of basic boom kN.m 850
Max. load moment with max. main boom length kN.m 458.6
Max. lifting height of main boom m 32.60 Deformation of boom is not taken into consideration.
Max. lifting height of fly jib m 40.4
Working speed Max. speed of single rope on main winch m/min 120 The 4th layer of drum
Derricking time of booms 60
Telescopic time of booms 70
Slewing speed r/min 0~1.8
Traveling specification Max. traveling speed km/h 70
Max. grade ability % 27
Min. turning circle diameter m 20
Min. ground clearance mm 250
Limits for exhaust pollutants and smoke Comply with related standards GB3847-2005 GB17691-2005 (Stage III)
Oil consumption per hundred kilometers L 40
Mass specification Deadweight of crane in traveling condition kg 26080
Complete vehicle kerb mass kg 25885
Front axle load kg 6380
Rear axle load kg 19700
Dimension specification Overall dimensions (LxWxH) mm 12320x2500x3400
Base on outriggers m 4.95
Distance between outriggers m 5.6
Main boom length m 10.2~32
Main boom angle -2-80
Fly jib length m 8
Offset angle of fly jib 0, 30
Chassis Model ZLJ5261
Class II
Feature No. ZLJ5261H3.2
Engine Model WP6.240
Rated power kW/r/min 176/2500
Max. output torque N.m/r/min 800/1300-1500
QY40V532 Truck Crane
Specification of QY40V532 Truck Crane
Item Value Remarks
Working performance specification Max. rated total lifting capacity kg 40000
Max. load moment of basic boom kN.m 1430
Max. load moment with max. main boom length kN.m 800
Max. lifting height of basic boom m 12.0
Max. lifting height of main boom m 41.7 Deformation of boom is not taken into consideration.
Max. lifting height of fly jib m 56.4
Working speed Max. speed of single rope on main winch m/min 130 The 4th layer of drum
Max. speed of single rope on auxiliary winch m/min 80 The 2nd layer of drum
Derricking time of booms 40
Telescopic time of booms 80
Slewing speed r/min 0~2.2
Traveling specification Max. traveling speed km/h 70
Max. grade ability % 30
Min. turning circle diameter m 24
Min. ground clearance mm 280
Limits for exhaust pollutants and smoke Comply with related standards GB3847-2005 GB17691 -2005
(Stage III)
Oil consumption per hundred kilometers L 48
Mass specification Deadweight of crane in traveling condition kg 36900
Complete vehicle kerb mass kg 36870
Front axle load kg 13700
Rear axle load kg 24300
Dimension specification Overall dimensions (LxWxH)mm 13060x2750x3560
Base on outriggers m 5.60
Distance between outriggers m 6.90(fully)
Main boom length m 10.9~41.0
Main boom angle -2-80
Fly jib length m 9 ,15
Offset angle of fly jib 0 , 30
Chassis Model ZLJ5414
Class II
Engine Model WP10.290 QSL 325
Rated power kW/r/min 213/2200 242/2100
Max. output torque N.m/r/min 1160/1200-1600 1424/1500
QY90V533 Truck crane
Technical Specification of QY90V533 Truck Crane
Item Specification Remarks
Working performance Max. rated lifting capacity kg 90000
Max. lifting torque of basic boom kN.m 3240
Max. lifting torque of Max. length boom kN.m 1800
Max. lifting height of basic boom m 13.4
Max. lifting height of boom m 48.5 The specifications do not include deflection of boom and jib.
Max. lifting height of jibm 67
Working speeds Max. hoist rope speed (Main winch) m/min 122 Drum 4th layer
Max. hoist rope speed (Auxiliary winch) m/min 68 Drum 2nd layer
Boom derricking times 72
Boom extending time s 146
Max. slewing speed r/min 1.9
Traveling specifications Max. traveling speed km/h 78
Max. gradeability % 43
Min. turning radius m 24
Min. ground clearance mm 290
Limit for exhaust pollutants and smoke Conform to related standards. GB3847-2005 GB17691 -2005 Conform to GB3847-2005 GB17691-2005(Stage III)
Oil consumption per hundred kilometers L 70
Weights Self weight in traveling condition kg 55000
Complete vehicle kerb mass kg 54870
Axle load (Front) kg 19600
Axle load (Rear) kg 35400
Dimensions Overall dimensions(LxWxH)mm 14550x2750x3750
Longitudinal distance between outriggers m 7.3
Transversal distance between outriggers m 7.4
Boom length m 12.5~48
Boom angle -2-80
Jib length m 10.8, 18.5
Offset 0, 30
Chassis Model ZLJ5550
Type II
Engine Model WP12.430N
Rated power kW/r/min 316/1900
Max. torque N.m/r/min 2060/1100~1400
SQ3.2SK2Q Truck Mounted Crane
Specifications of SQ3.2SK2Q Truck Mounted Crane
Engine Cummins EQB160-20
Dimension 8510x2470x3310 mm
Max lift capacity 3200kg
Oil tank capacity 60L
Max lift moment 6.72t.m
Slewing angle All Rotation
Power recommended 14kw
Crane weight 1316kg
Max flow of hydraulic system 25L/min
Installation space 850mm
Rated pressure of hydraulic system 20Pa
Max working radius 7.56 m
Max working height 9.50m
SQ5ZK2Q Truck Mounted Crane
Features of SQ5ZK2Q Truck Mounted Crane
1. This truck mounted crane is of updated telescopic technology, which ensures smooth and highly-efficient operation of the boom.
2. Its unique hoisting device is of small volume, high efficiency, and reliable braking.
3. It adopts full circle swinging technologies and swings fast and smoothly.
4. Its hydraulic components are made as per imported technologies to ensure overall performance of the truck mounted crane.
Specifications of SQ5ZK2Q Truck Mounted Crane
Engine Cummins EQB160-20
Dimension 8510x2470x3360 mm
Max lift capacity 5000kg
Oil tank capacity 90L
Max lift moment 10.5 t.m
Slewing angle All Rotation
Power recommended 18kw
Crane weight 2074kg
Max flow of hydraulic system 25L/min
Installation space 1050 mm
Rated pressure of hydraulic system 28Pa
Max working radius 8.01 m
Max working height 10.50 m
SQ8ZK3Q Truck Mounted Crane
Features of SQ8ZK3Q Truck Mounted Crane
1. It is made of high strength steel plate, ensuring high performance and light weight of the truck mounted crane.
2. It adopts full circle swinging technologies and swings fast and smoothly.
3. Its hydraulic components are produced basing on imported technology. It ensures the precision operation of this construction crane.
4. This truck mounted crane is of reasonable modular design. For instance, its optional high seat could provide the operator with broader view.
Specifications of SQ8ZK3Q Truck Mounted Crane
Engine Cummins EQB210-20
Dimension 11960x2470x3560 mm
Max lift capacity 8000kg
Oil tank capacity 140L
Max lift moment 16 t.m
Slewing angle All Rotation
Power recommended 28 kw
Crane weight 2970kg
Max flow of hydraulic system 40 L/min
Installation space 1150 mm
Rated pressure of hydraulic system 28Pa
Max working radius 9.76 m
Max working height 12.50 m
All Terrain Crane
Specifications of All Terrain Crane
Specifications when Traveling
Classificatory Item Parameter
Outline dimension Overall length mm 15918
Overall width mm 3080
Overall height mm 4000
Wheel base Axle 1, Axle 2 mm 2750
Axle 2, Axle 3 mm 1650
Axle 3, Axle 4 mm 2000
Axle 4, Axle 5 mm 1650
Axle 5, Axle 6 mm 1650
Track mm 2690
Front overhang mm 2325
Rear overhang mm 2005
Mass Total mass in travel state kg 72000
Total mass in ready state kg 71870
Axle load Axle 1 kg 12000
Axle 2 kg 12000
Axle 3 kg 12000
Axle 4 kg 12000
Axle 5 kg 12000
Axle 6 kg 12000
Travel performance Travel speed Max. travel speed km/h 71
Min. stable travel speed km/h 2.1
Min. turning diameter m 24
Min. ground clearance mm 278
Approach angle 25
Departure angle 17.9
Braking distance (at 30km/h with full load) m 10
Max. grade-ability % 48
Exterior noise when traveling dB (A) 84
Fuel consumption for 100km L 80
Chassis Engine model OM502LA
Max. engine output kW/(r/min) 390/(1900)
Driving type 12x6
Tyre 14.00
No. of Tires (spare tire excluded) 12
Main Technical Data for Lifting Operation
Classificatory Item Parameter
Lifting performance Max. total rated lifting capacity t 240
Min. rated working radius m 3
Turning radius at turntable tail mm 4800
Max. load moment Base boom kN·m 7797 (132.6tx6m)
Fully extended boom kN·m 2940 (10tx30m)
Outrigger span Longitudinal m 9.625
Lateral m 8.7
Lifting height Base boom m 10.7
Fully extended boom m 63.8
Fully extended boom + Jib (12 m) m 78.6
Fully extended boom + Jib (20 m) m 86.4
Boom Length Base boom m 13.2
Fully extended boom m 67
Fully extended boom + Jib (12 m) m 79
Fully extended boom + Jib (20 m) m 87
Jib offset angle 0, 15, 30
Working speed Boom elevating time s 65
Boom full telescoping time s 650
Max. swing speed r/min 1.6
Outrigger extension time Horizontal outrigger Synchronous extension s 50
Synchronous retraction s 40
Vertical outrigger Synchronous extension s 50
Synchronous retraction s 45
Hoist speed (Single line, null load, forth layer) Main winch m/min 115
Aux. winch m/min 118
Noise limit Crane exterior noise dB(A) 118
At seated position dB(A) 90
Crawler Crane
Crawler crane is a kind of construction crane for use on high buildings. Its crawler belt offers large ground connection area, making it applicable to various road conditions. Crawler crane can move while loaded and is suitable for excavating, ramming, and piling applications on construction sites. As a heavy duty crane, it needs to be transported by other vehicles to other sites.
Features
QUY450 crawler crane, supplied by Shanglong International, is a large-tonnage high end crane. It has the following features.
1. This construction crane adopts crawler belt and lattice type boom. It causes less specific pressure to the ground and has features like large hoisting height, good hoisting strength. It could travel while loaded.
2. Its tower-type base boom can work adjacent to a high building.
3. It adopts Germany PAT numerical control system, which ensures safe operation of the whole crawler crane.
4. It adopts pump-controlled variable displacement hydraulic system and electronic proportional control system and features high efficiency, good energy efficiency and precise control.
5. The power transmission parts of this crawler crane are imported form well-know companies. They are environmental friendly and reliable.
Maintenance
Since the crawler belt of crawler crane is more vulnerable, oil filling and cleaning jobs should be carried out frequently. Crawler crane should work on rigid or flat grounds. Stones, sleepers, steel plate or special-made roadbeds should be laid if necessary.
Specifications
Items Unit Value
Max. total rated lifting load t 450
Standard working condition Heavy boom length m 24 -84
Base boom length m 12 -36
Light boom length m 42 -102
Tower attachment length m 24 - 72
Superlift working condition Heavy boom length m 36 - 84
Base boom length m 12 -36
Light boom length m 78 - 126
Max. single line hoisting speed m/min 130
Max. single line speed for boom elevating system m/min 50x2
Max. single line speed for tower attachment elevating system m/min 112
Max. single line speed for sideways superlift elevating system m/min 112
Swing speed r/min 1.0
Traveling speed km/h 0.95
Ground pressure MPa 0.132
Power rated kW 383
Total mass (with 450t hook block, 24m heavy boon ) t 415
Max loading weight ( in transportation) t 59.5
Dimensions (in transportation) m 11.59 x 3.4 x 3.45